Wilfa INNOVAC XCEED FLOW Anleitung Seite 17

CORDLESS VACUUM WITH WET MOP · HS2-XSWB
Charging failure Ambient temperature
during charging is too
high or too low
Battery liquid The vacuum cleaner has
leakage not been used for a long
time.
E1 Airflow is blocked
E2 Fan fault
E3 Battery pack failure
E5 Circuit board hardware
failure
"Cleaning" Nozzle blocked
Charge the appliance at the
proper temperature. Make
sure the vacuum cleaner is
not placed in the sunlight if it
is too warm, and make sure
doors and windows are closed
if it is too cold.
Change the battery. Contact
the store to replace the
battery.
Remove obstacle and clean
filter. Contact the store if the
problem still occurs.
Clean the filter. Contact the
store if the problem still
occurs.
Change battery
Contact the store
Remove obstacle
15
EN