Wilfa INNOVAC XCEED FLOW Anleitung Seite 10

USE
EN
• Press the power button to start.
• After switching the vacuum cleaner on, press the speed regulation button to
adjust the speed. The speed will go from Auto-High-Low.
• When using the Auto level, the dust sensing function is enabled. After sensing
dust, the animation on the display will change from blue to purple. If no dust
is detected, the animation remains blue, and power will run on low.
• When the vacuum cleaner is off, press the speed regulation button to display
the battery percentage.
USB-C charging port
MOP ATTACHMENT
1. Before use, attach the mop onto the tank. Fill the tank with water and
close the lid. Do not fill over the max indicator.
2. Attach the mop to the floor brush by placing the mop attachment on the
floor, and gently lower the electric floor brush onto the mop attachment
(see illustration)
INSTRUCTION MANUAL · INNOVAC XCEED FLOW
Speed regulation
Display
8
Power button