Removing The Memory Card - Sony NEX-F3D Bedienungsanleitung

Note
• Images recorded on an SDXC memory card cannot be imported to or played on
computers or AV devices that are not compatible with exFAT. Make sure that the
device is compatible with exFAT before connecting it to the camera. If you
connect your camera to an incompatible device, you may be prompted to format
the card. Never format the card in response to this prompt, as doing so will erase
all data on the card. (exFAT is the file system used on SDXC memory cards.)
x

Removing the memory card

Open the memory card cover, make sure
that the access lamp is not lit, and push the
memory card once.
Note
• When the access lamp is lit, do not remove the memory card or the battery pack, or
turn off the power. The data may be corrupted.
GB
20
Access lamp