Using The Household Mains Socket; Getting Started; Initial Setting - Panasonic Rf-D40 Bedienungsanleitung

Using the household mains socket

Connect the AC adaptor firmly to the unit and the household mains socket.
• Do not use any other AC adaptors except the supplied one.
• The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always "live" as long
as the AC adaptor is connected to an electrical outlet.

Getting started

Operations in this operating instructions are described mainly with the remote control, but you can perform the
operations with the front panel buttons if the controls are the same functions.
1. Extend the antenna.
2. Press [ ] to switch on the unit.

Initial setting

The time you switch on the unit, please setup the language and Wi-Fi network.
1. Press [VOL+]/[VOL-] repeatedly to select the desired language, then press [OK] to confirm.
2. After the language setup, "Scanning for Wireless Network..." appears, then the Wi-Fi network list is shown.
3. Press [VOL+]/[VOL-] repeatedly to select the Wi-Fi network then press [OK] to confirm.
4. Press number/character buttons, or [TUNE-]/[TUNE+] repeatedly on the front panel to input passwords.
Press [ ]/[ ] to move input position.
5. Press [OK] to get connected.
lights up on the display.
• To change the language setting, please refer to "Configuration setting" (P12).
• Wi-Fi connection is necessary for Internet radio, Podcast, Local radio function.
• To check or change the Wi-Fi network settings, please refer to "Configuration setting" (P12).
body改箭头.indd 6
To household mains socket
6
2024/11/21 8:34:36