Audio Settings - Grundig GR 22-110 Bedlenungsanleitung

SOUND
Volume
●●●●
Balance
●●●●●●●●●●●●●●●●●●
AVL Off
Sound Type Stereo
Sound Mode Normal
Equalizer
Headphone
●●●
Back
Select
Exit
SOUND
Volume
●●●●
Balance
●●●●●●●●●●●●●●●●●●
AVL Off
Sound Type Stereo
Sound Mode Normal
Equalizer
Headphone
●●●
Back
Select
Exit
SOUND
Volume
●●●●
Balance
●●●●●●●●●●●●●●●●●●
AVL Off
Sound Type Stereo
Sound Mode Normal
Equalizer
Headphone
●●●
Back
Select
Exit
SETTINGS
Audio­settings­
1 Open the menu with »MENU«.
– The »PICTURE« menu is displayed.
29
2 Select the »SOUND« menu with »
0
»OK«.
Note:
s
Additional operations are explained in the following sections.
21
Volume
1 Select »Volume« with »
» « or »
r
Balance
1 Select »Balance« with »
or » «.
e
Automatic­volume
The television channels broadcast at different volumes. The automatic
volume limiting (AVL) function means the volume is kept the same
29
when you switch between channels.
0
1 Select »AVL« with »
» «.
e
s
21
Stereo­/­two­channel,­mono
If the device receives two channel programmes, e.g. a film with
the original sound on sound channel B (display: »Dual II«) and the
dubbed version on sound channel A (display: »Dual I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
29
0 quality is poor.
1 Select »Sound Type« with »
» « or »
r
s
21
Stereo­width
Widens the audio output for stereo programmes and improves the
sound with mono reception.
1 Select »Sound Mode« with »
2 Press »
r
­ - ---------------------------------------------------------------------------------------------------
« or »
q
«.
e
« or »
q w
« or » « and then select »On« with »
q w
« or »
q
«.
e
« or »
q
« or » « to select the setting »Spatial«.
e
« or » « and confirm with
r e
« and adjust the setting with
w
« and adjust the setting with »
« and adjust the setting with
w
«.
w
«
r
« or
r
­ 1 9