Audio Settings - Grundig GR 26-120 3HD Handbuch

souND
volume
BalaNCe
souND type stereo
souND moDe Normal
avl oFF
Bass
treBle
heaDphoNe
ChaNge BaCk
SETTINGS
Audio settings
i
1 Press »
« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2 Select »SOUND« with »
– The »SOUND« menu appears.
Volume, Bass, Treble and Balance
1 Select »VOLUME«, »BASS«, »TREBLE« or »BALANCE« with »
or » « and adjust the setting with »
Λ
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »DUAL II«) and the
dubbed version on sound channel A (display: »DUAL I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »STEREO«).
You can switch the sound to »MONO« if the stereo reception
quality is poor.
1 Select »SOUND TYPE« with »
–
with » « or »
Stereo width
Widens the audio output for stereo programmes and improves the
sound with mono reception.
1 Select »SOUND MODE« with »
2 Select the setting »Spatial« with »
Automatic volume
The television channels broadcast at different volumes. The automatic
volume limiting (AVL) function means the volume is kept the same
when you switch between channels.
1 Select »AVL« with »
+
» «.
Concluding the settings
i
1 Press »
« to finish the settings.
----------------------------------------------------------------------------------------------------
« or »
V Λ
« or »
V
+
«.
V
–
« or » « and then select »On« with »
V Λ
« and confirm with »●«.
– +
« or » «.
« and adjust the setting
Λ
« or » «.
Λ
+
« or » «.
«
V
–
« or
15