Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SETTINGS
Initial set-up and tuning
television channels
The television set is equipped with automatic
channel search, which searches for satellite
channels (DVB-S), terrestrial channels (DVB-T),
cable channels (DVB-C) and analogue channels.
You start the search and the television channels
will be stored into the Program Table. Following,
you can sort the television channels in the Pro-
gram Table.
For DVB-S channels there are 6000 presets
available, for DVB-T and DVB-C channels 1000
presets, and 99 presets for analogue channels.
The various settings
Depending on the type of antenna connected,
you can decide which channels you would like
the television to search for.
Tunes digital television channels from the satel-
7
lite, from page "Tuning the television channels
from satellite (DVB-S)" on page 15.
You have two options for this search:
– the basic installation which presets a stand-
ard selection, e.g. the satellite Astra 19.2°
East; you need only start the search;
– the professional installation, which allows
you to make all required settings and set pa-
rameters for your receiver system.
Tunes digital terrestrial television channels, on
7
page "Tuning terrestrial television channels
(DVB-T)" on page 17.
Tunes digital television channels from the cable
7
provider, on page "Tuning television channels
from the cable provider (DVB-C)" on page 17.
Tunes analogue television channels, in the
7
chapter "Special functions", starting on
page "Tuning analogue television channels"
on page 51.
Further settings for digital television chan-
7
nels after the initial set-up can also be found
in the chapter "Special Settings", starting on
page "Searching for digital terrestrial TV chan-
nels automatically" on page 50.
Note:
Make the language and country selection for
7
all types, then continue reading the respective
chapter.
14
ENGLISH
-----------------------------------------------------------------------------------------------------------------------------------------
Selecting language, country and
operating mode
1
Switch on the television set from standby with
»
«
»
POWER
1...0
,
– During initial set-up, the
will be displayed.
Help:
If this menu is not displayed, restore the
7
television set to its default settings (see
page "Restoring the television to the default
settings" on page 36).
2
Select the menu language with
»C«
»D«
or
and press
3
Select the mode with
»
«
OK
to confirm.
– The settings used in
save energy.
– Alternatively, the menu item
can be selected which the retailer can use
for demonstrating the device functions.
Note:
»
End the
Shop Mode
7
evision set to its default settings (see page
"Restoring the television to the default set-
tings" on page 36).
4
Select the country in which the television set
is operated with
»
«
OK
and press
»
– The
Source Setup
»
the
Connection Type
Note:
You can find a description of how to tune
7
the television channel of your choice – de-
pending on the antenna connected – in the
following chapters.
«
»
«
»
«
P+
P-
or
or
.
»
Installation Guide
»
B
«
,
»
«
OK
to confirm.
»
B
«
»
A
«
or
and press
»
«
Home Mode
help to
»
Shop Mode
«
by restoring the tel-
»
B
«
»
A
«
»C«
,
,
or
to confirm.
«
menu appears with
«
line marked.
«
»
A
«
,
«
»D«
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
