Samsung SCC-B2303 Bedienungsanleitung Seite 14

COLOR/BW
E
The COLOR/BW menu turns the IR(Infrared) Filter on or off. In low
illumination environments, the BW mode will turn off the IR Filter and the
sensitivity will be as high as that of BW cameras. Otherwise, the BW mode
will turn on the IR Filter and the sensitivity will return to normal to recover
the normal screen.
CAMERA ID OFF
IRIS ALC...
BLC OFF
COLOR/BW COLOR...
SHUTTER AUTO X8
MOTION F.FAST
WHITE BAL ATW
SYNC INT
SPECIAL ...
EXIT QUIT
❿ COLOR...
This is the IR Filter ON Mode with the normal screen. If you press the
[Enter] key, you will be able to set up the COLOR GAIN LEVEL and
even the AGC COLOR LEVEL while the AGC function is activated.
CAMERA ID OFF
IRIS ALC...
BLC OFF
COLOR/BW COLOR...
SHUTTER AUTO X8
MOTION F.FAST
WHITE BAL ATW
SYNC INT
SPECIAL ...
EXIT QUIT
26
CAMERA ID OFF
IRIS ALC...
BLC OFF
COLOR/BW BW...
SHUTTER AUTO X8
Use the
MOTION F.FAST
[Left/Right]
WHITE BAL ATW
Key SYNC INT
SPECIAL ...
EXIT QUIT
(COLOR)
press the
[ENTER] key
GAIN (0) I--------
AGC COLOR (0) ----I----
RET
❿ BW...
This is the IR Filter OFF Mode in black and white.(high sensitivity like
BW cameras) If you select the BW... and press the [Enter] key, the BW
submenu screen will appear. You will be able to send out the BURST
signal by turning on or off in this menu.
CAMERA ID OFF
IRIS ALC...
BLC OFF
COLOR/BW BW...
SHUTTER AUTO X8
press the
MOTION F.FAST
[ENTER] key
WHITE BAL ---
SYNC INT
SPECIAL ...
EXIT QUIT
(BW)
BURST ON
RET
27
E