Samsung SCC-B2303 Bedienungsanleitung Seite 13

BLC
E
If you use an ordinary camera when there is an intense and concentrated
illumination behind an object, the back light will shade the image on the
monitor screen. The BLC function prevents such a back light effect to secure
a clear image under all illumination environments. Press the LEFT or RIGHT
key at OFF to set the USER function for a setting of the already set 5 areas
including BOTTOM..., TOP..., LEFT..., RIGHT..., and CENTER...or USER... for
a direct area setting. If you select the BOTTOM... in the BLC menu and press
the [ENTER] key, you will be able to certify the already set BOTTOM area.
CAMERA ID OFF
IRIS ALC...
BLC BOTTOM...
COLOR/BW COLOR...
SHUTTER AUTO X8
MOTION F.FAST
WHITE BAL ATW
SYNC INT
SPECIAL ...
EXIT QUIT
24
press the
[ENTER] key
❿ USER AREA
If you select USER... in the BLC menu by using the LEFT or RIGHT key
and press the [ENTER] key, you will be able to determine the size and
location of the BLC area by yourself. When the area is not flashing, you
can specify the area size by pressing the direction keys [LEFT, RIGHT,
UP, or DOWN]. If you press the [ENTER] key when the area is not
flashing, the area will start flashing. Then you can specify the area size
by pressing the direction keys [LEFT, RIGHT, UP, or DOWN]. If you
press the [ENTER] key again, you will escape from the USER AREA
setting menu.
CAMERA ID OFF
IRIS ALC...
BLC USER...
COLOR/BW COLOR...
SHUTTER AUTO X8
press the
MOTION F.FAST
[ENTER] key
WHITE BAL ATW
SYNC INT
SPECIAL ...
EXIT QUIT
SIZE..
œ
➛ ❿
press the
[ENTER] key
❷
POSITION..
SIZE..
œ
➛ ❿
❷
POSITION..
SIZE..
œ
❷
➛ ❿
POSITION..
25
E