Settings; Basic Setting Operation; General Setup (General); Sound Setup (Sound) - Sony RSX-GS9 Bedienungsanleitung

Settings

Basic Setting Operation

You can set items in the following setup categories:
General setup (General), Sound setup (Sound),
BLUETOOTH setup (BT Setting), Sony | Music Center
setup (Sony APP)
(While the BT phone is selected, only the
BLUETOOTH setup is available.)
Use the remote commander to perform the
following.
1
Press and hold MENU, press  or  to
select the setup category, then press
ENTER.
The items that can be set differ depending on
the source and settings.
2
Press  or  to select the options, then
press ENTER.
To return to the previous display
Press .

General Setup (General)

Clock Adjust (page 9)
Dimmer
Dims the display: [ON], [OFF], [Auto].
([Auto] is available only when the illumination
control lead is connected, and turn on the head
light).
Brightness
Adjusts the display brightness. The brightness
level is adjustable: [1] – [10].
The brightness setting is stored and applied
when the dimmer function is activated or
deactivated.
Optical Out
Selects the optical output setting: [OFF],
[48kHz], [96kHz].
(The volume control on the unit does not work
when set to [48kHz] or [96kHz].)
BTM (best tuning memory) (page 12)
(Available only when the tuner is selected.)
Regional
Restricts reception to a specific region: [ON],
[OFF]. (Available only when FM is received.)
Firmware
(Available only while the source is off and the
clock is displayed.)
Checks/updates the firmware version. For
details, visit the support site on the back cover.
Version
Displays current firmware version.
Update
Enters firmware update process: [NO], [YES].
Updating the firmware takes a few minutes to
complete. During the update, do not turn the
ignition to the OFF position.

Sound Setup (Sound)

This setup menu can also be opened by pressing
SOUND. If [Optical Out] is set to [48kHz] or [96kHz],
this setup menu is not available.
Subwoofer
(Automatically set to [OFF] when [Optical Out] is
set to [48kHz] or [96kHz].) (Not available during
native DSD playback while USB-DAC is selected.)
Sub Level* (subwoofer level)
Adjusts the subwoofer volume level: [+10dB] –
[0dB] – [-10dB].
Sub Phase (subwoofer phase)
Selects the subwoofer phase: [Normal],
[Reverse].
LPF Freq (low pass filter frequency)
Selects the subwoofer cut-off frequency: [OFF],
[50Hz], [63Hz], [79Hz], [99Hz], [125Hz], [158Hz],
[198Hz], [250Hz].
LPF Slope (low pass filter slope)
Selects the LPF slope (effective only when [LPF
Freq] is set to other than [OFF]): [SLP1] (-12dB/
oct), [SLP2] (-24dB/oct), [SLP3] (-36dB/oct),
[SLP4] (-48dB/oct).
LPF Mode (low pass filter mode)
Sets the filter mode: [Mono], [Stereo].
HPF Freq (high pass filter frequency)
Selects the front/rear speaker cut-off frequency:
[OFF], [50Hz], [63Hz], [79Hz], [99Hz], [125Hz],
[158Hz], [198Hz], [250Hz].
HPF Slope (high pass filter slope)
Selects the HPF slope (effective only when [HPF
Freq] is set to other than [OFF]): [SLP1] (-12dB/
oct), [SLP2] (-24dB/oct), [SLP3] (-36dB/oct),
[SLP4] (-48dB/oct).
* Available even if [Optical Out] is set.
Sub DSD (subwoofer DSD)
(Available during native DSD playback while
USB-DAC is selected.)
LPF Freq (low pass filter frequency)
Selects the subwoofer cut-off frequency: [OFF],
[150Hz].
LPF Mode (low pass filter mode)
Sets the filter mode: [Mono], [Stereo].
17
GB