DUROFIX RI2036A1 Produktinformationen Seite 6

that may be suitable for one tool may create a risk of injury when used on another tool.
WARNING
Ensure the switch is in the off position before inserting battery pack. Inserting the battery pack
a.
into power tools that have the switch on invites accidents.
b. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when used with another battery pack.
c. Use power tools only with specifically designated battery packs. Use of any other battery packs
may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects like paper clips, coins,
d.
keys, nails, screws, or other small metal objects that can make a connection from one terminal
to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
e.
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
f. Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
g. Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion. NOTE The temperature „130 °C" can be replaced by
the temperature „265 °F".
h. Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions. Charging improperly or at temperatures outside
the specified range may damage the battery and increase the risk of fire.
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel may result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions
in the Maintenance section of this manual. Use of unauthorized parts or failure to
follow Maintenance Instructions may create a risk of shock or injury.
SPECIFIC SAFETY RULES AND SYMBOLS
CAUTION
where the cutting tool may contact hidden wiring. Contact with 'live' wire will also make exposed
metal parts of the tool 'live' and shock the operator.
Be aware that this tool is always in an operating condition, because it does not have to be plugged
into an electrical outlet. Always set the trigger switch to the locked OFF position when installing or
removing the battery pack or bits.
Do not use bits or sockets larger than those recommended. Large bits or drills may overload the
wrench/driver and damage the motor and gears.
1English1
BATTERY TOOL USE AND CARE
SERVICE
Hold tool by insulated gripping surfaces when performing an operation
English
-5