DUROFIX RI2036A1 Produktinformationen Seite 10

− of the need to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of
use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time).
Charger Model Number DC20EU28-C30
Battery Pack Model Number
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery pack release button (9) and pull
the battery pack (10) out of tool.
TO INSTALL BATTERY PACK: Push the battery pack (10) onto tool until it locks in
place.
INSTALLING SOCKETS
Always follow the procedure below to install a socket.
1. Insert a socket into the anvil (1).
2. Make sure the socket is fixed in the anvil while clicking on the ball of the anvil.
REMOVING SOCKETS
Always follow the procedure below to remove a socket.
CAUTION
FUNCTIONS & DISPLAY:
RI2036A1
1. There are 4 stages of battery capacity gauge on LCD.
2. When pressing VSR switch, then the illuminative LED will be on at the same time.
3. There are 6 stages of torque clutches and one "MAX" stage.
REFERENCE TORQUE VALUES OF EACH TORQUE CLUTCH STAGE
Stage 1: average value: 80 Nm (60 ft-lbs)
1English1
Input 100-240 V a.c., 50~60 Hz
Output 12.4-21.0 Vd.c.
Output Amps 3.0A
Input Power 85W
B2036LA / B2036LA-2
B2036LB / B2036LB-2
Type Li-ion
Voltage 20V
2.0Ah / 2.5Ah
Capacity
4.0Ah / 5.0Ah
ASSEMBLY
Always set switch (5) to off position when installing and removing socket.
OPERATION
English
-9