Accessories; Protecting The Environment - Durofix Ri2036A1 Produktinformationen

With the motor running, blow dirt and dust out of all air vents with dry air at least once
a week. Wear safety glasses when performing this. Exterior plastic parts may be
cleaned a damp cloth and mild detergent. Although these parts are highly are solvent
resistant, NEVER use solvent.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Recommended accessories for use with your tool are available at extra cost from your
local service center.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments should be performed by certified service centers or other qualified
service organizations, always using identical replacement parts.
Before disposing of damaged, check with your state Environmental
Protection Agency to find out about special restrictions on the disposal of
tool or return them to a certified service center for recycling.
Error Code
Code
LV
OH
LT
OC
No error code
(Display normal)
No error code
(Display normal)
1English1

ACCESSORIES

PROTECTING THE ENVIRONMENT

Abnormal
Battery
Low Voltage
Battery
Over Heat
Battery
Low Temp.
Battery
Over Current
In running tool stop
(Motor over heat)
In running tool stop
(Motor damage)
English
Troubleshooting
1. Replace with the other charged battery.
2. Re-charge the current battery.
1. Replace with the other charged battery.
2. Keep the current battery cool down.
1. Replace with the other charged battery.
2. Pre-heat the current battery up to 16℃
Release the trigger then repress the trigger to
restart up
Keep the tool cool down to room temp., press
the trigger to restart up.
Keep the tool cool down to room temp., press
the trigger without action.
(Send the tool to service center checking and
repairing by professional technician)
-14