Using The Features Menu - Sony Grand Wega KF-42SX200 Bedienungsanleitung

Menu System

Using the Features Menu

Using the Features menu you can:
a) Select if you want to listen to the sound from the TV set directly or through an external amplifier.
b) Automatically adjust the size of picture.
c) Select a time period after which the TV set switches itself into standby mode.
d) Lock the buttons on the TVset. In this way, the TV set only works by using the remote control buttons.
e) Select the source to be output from the Scart connector :3/q3 (SMARTLINK). In this way you can record from this scart
connector while watching another source. If your VCR supports Smartlink, this procedure is not necessary.
16
Menu System
1
Press the button on the remote control to display the menu
on the screen.
2
Push the joystick to select the
enter the Features menu.
3
Push the joystick or
push to enter (see the table below for the effect of each menu item).
4
Push to select the desired setting and press the
or
to store.
5
Press the button to exit and return to the normal TV screen.
Features Effect / Operation
Speaker Main (sound from the TV set)
Centre In (sound from external amplifier)
Auto Format Off: Size of picture is not automatically adjusted.
(only for aerial Normal: Size of picture is automatically adjusted
signal) according to the broadcaster information.
Full: The TV set automatically adjusts the picture
size to eliminate any dark areas on the TV picture.
Format Correction Off: 4:3/14:9 is selected.
(only if Auto Format
is set to "Normal" On: Smart mode is selected automatically for
or "Full") 4:3/14:9 broadcast.
Sleep Timer Off
10 min.
20 min.
. .
.
90 min.
• One minute before the TV set switches into
standby mode, the time remaining is displayed
on the screen automatically.
•When watching the TV, press the
on the remote control to display the time
remaining.
•To return to normal operation from standby
mode, press the TV
control.
Parental Lock Off (Normal mode)
On
AV3 Output TV
AV1 (audio/video signal from the Scart
AV2 (audio/video signal from the Scart
AV3 (audio/video signal from the Scart
AV4 (audio/video signal from the connector ... 4
If you have connected a decoder, please
remember to change the AV3 Output back to
"TV" for correct unscrambling.
symbol, then push
to select the desired menu item, then
button on the remote
(The TV set can only be switched on using the
remote control, the buttons on the TV do not
work)
(audio/video signal from the aerial)
connector :1/ 1).
connector :2/ 2).
connector :3/q3 (SMARTLINK)).
placed in the front of the TV set).
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
to
AI
Noise Reduction
Colour Tone
Select: Enter Menu:
Features
Speaker
Auto Format
Format Correction
button
Sleep Timer
Parental Lock
AV2 Output
Select: Enter:
Speaker
Auto Format
Format Correction
Sleep Timer
button
Parental Lock
AV2 Output
Personal
On
Off
Normal
Main
Normal
On
Off
Off
TV
Main
Centre In
Off
Normal
Full
Off
On
10 min
Off
On
TV
AV1
AV2
AV3
AV4