Viewing Pictures From Connected Equipment; Using The Menu; Navigating Through Menus - Sony KDL-S40A11E Bedienungsanleitung

Viewing pictures from
connected equipment
Switch on the connected equipment, then
perform one of the following operation.
For equipment connected to the scart sockets using a
fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment appears on
the screen.
For an auto-tuned VCR (page 11)
Press PROG +/-, or the number buttons, to select the
video channel. You can also press
until the correct input symbol (see below) appears on
the screen.
For other connected equipment
Press / repeatedly until the correct input
symbol (see below) appears on the screen or press OK
to
access the Input signal index table. Press
an input source, press m/M, then press OK.
1/ 1, 2/ 2:
Audio/video or RGB input signal through the scart
socket / 1 or 2.
source has been connected.
3:
Component input signal through the Y, P
sockets / 3, and audio input signal through the
L/G/S/I, R/D/D/D sockets
4/ 4:
Video input signal through the video socket
audio input signal through the audio socket L/G/S/I
(MONO), R/D/D/D sockets
the equipment is connected to the S video socket
instead of the video socket
signal is input through the S video socket
5:
RGB input signal through the PC connectors
audio input signal through the socket
6: (KDL-S40A11E, KDL-S32A11E, KDL-
S26A11E only)
Digital audio/video signal is input through the HDMI IN
6 socket. Audio input signal is analogue only if the
equipment has been connected using the DVI and audio
out socket.
Additional operations
To Do this
Return to the normal Press DIGITAL or ANALOG.
TV operation
Access the Input Press OK. Press
signal index table input source, press m/M, then press
OK.
/ repeatedly
to select
,
appears only if an RGB
/C , P /C
B B R R
/ 3.
4, and
4. appears only if
4
4, and S video input
4.
5, and
.
to select an
,

Using the Menu

Navigating through
menus
1
Press MENU to display the menu.
2
Press M/m to select a menu icon, press ,.
3
Press M/m/</, to select an option.
4
Press M/m/</, to change/set the
setting, then press OK.
To exit the menu, press MENU.
To return to the last display, press <.
2,3,4
4
1
Continued
19
GB