General Settings - Beaba Zen+ 2 Gebrauchsanweisung

VII. GENERAL SETTINGS
PARENT UNIT FUNCTIONS
1/ Pairing the camera with the parent unit
The camera pairs with the parent unit
automatically when both units are switched on
and the camera is plugged in.
If this is not the case, here are the steps to pair them
Note: In the "camera" menu, this icon indicates
that the camera is paired with the parent unit. To pair a new
camera, select a camera without this icon.
You can connect up to 4 cameras to the monitor, and
see them one after the other using this button
Additional cameras are available on our website: www.
beaba.com
Add a camera
1. Press
2. Use the arrows to select the camera icon
3. Press OK to enter the menu, and use the arrows to select the desired camera.
4. Press and use the up/down arrows to select and press
5. When this icon appears on the screen press the pairing button on the back of the camera
6. Once paired, this icon appears on the screen
7. If this does not work, repeat all the steps again.
22