Safety Guidelines - Vevor H7L Bedienungsanleitung

Thank you for using our products. To get the best of this unit, please
read carefully this manual before using.
 It is a kind of induction heating system for the automotive
after-market.
 It uses high frequency magnetic fields to heat up metal objects.
Bolts, Bearings, Pulleys etc.
 It is safe heat for removal of trim panels without the risk of burning or
melting.
A. General Work Area Safety Instructions
 Read and understand all instructions. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
 Keep bystanders, children, visitors and animals away
while operating the machine. These beings may create
distractions that cause you to lose control of the machine.
 Keep your work area clean and well illuminated.
Cluttered and dark areas invite accidents.
 Work outdoors, if there is no danger of rain, water or
moisture. If this is not possible, keep the inside work area
well-ventilated and dry. Be sure that ventilation fans are
moving air from the inside to the outside.
 Keep a fully always charged fire extinguisher at hand
when using the machine.
FOREWORD
I. SAFETY GUIDELINES
- 2 -