Control Panel; Cleaning And Maintenance - IKEA LAGAN Kurzanleitung

ENGLISH
Control panel
A
A
Light button.
The light button has two positions.
To switch on the lights: move the button
to the right.
B
Extraction power selection button.
The extraction speed switch has different
settings, depending on the amount of
steam and fumes.
To increase the extraction power: move
the button to the right.
Cleaning and maintenance
WARNING:
- Never use steam cleaning equipment.
- Disconnect the appliance from the
power supply.
IMPORTANT: do not use corrosive or
abrasive detergents. If any of these products
accidentally comes into contact with the
appliance, clean immediately with a damp
cloth.
• Clean the surfaces with a damp cloth.
If it is very dirty, add a few drops of
washing up detergent to the water.
Finish off with a dry cloth.
IMPORTANT: do not use abrasive sponges
or metallic scrapers or scourers. Over time,
these can ruin the surface.
• Use detergents specifically designed for
cleaning the appliance and follow the
manufacturer instructions.
B
IMPORTANT: clean the filters at least
monthly to remove any oil or grease
residuals.
To clean the grease filter
The metal grease filter has an unlimited life
and must be washed once a month by hand
or dishwasher at low temperature and with
a short cycle.
With cleaning in a dishwasher the grease
filter may become dull; this does not effect
its filtering capacity.
Grease filter maintenance:
1. Disconnect the hood from the power
supply.
2. Open the extraction grille or remove the
self-supporting grease filter (in the latter
case, wash the filter immediately).
3. Remove the device securing the grease
filter.
4. Remove the dirty grease filter.
7