IKEA LAGAN Kurzanleitung Seite 8

ENGLISH
5. After changing or washing the grease
filter (depending on the model), refit
by proceeding in reverse order, making
sure it covers the entire extraction
surface.
Charcoal filter maintenance
(Recirculation hoods only).
Charcoal filter is neither lavable nor
regenerable.
Replace it every 4 months.
1. Disconnect the hood from the power
supply.
2. Open the extractor grille or remove the
self-supporting grease filter.
3. Fit the filter over the extraction motor
protection grille so that the slots on the
filter match the hooking pins located at
the sides of the motor protection grille.
4. Turn the charcoal filter clockwise to lock
it (bayonet fixing).
5. Make sure the internal selector
"Extractor /Filter" is set to "Filter".
6. Refit the extractor grille or grease filter.
To remove the charcoal filter proceed in
reverse order.
Lamp maintenance
1. Disconnect the hood from the power
supply.
2. Open the extractor grille or remove the
self-supporting grease filter.
3. Remove the burnt-out lamp. Use 28W
max. halogen E14 lamps only.
4. Refit the extractor grille or grease filter.
IMPORTANT: make sure you don't touch the
lamp with your bare hands.
8