CODE HOMME TONDEUSE Bedienungsanleitung Seite 4

GENERAL FEATURES
Please read these instructions carefully before using
this product and keep them in a safe place for future
reference.
1. Shaving blade
2. LED display
3. On/Off button
4. Charging area
5. Hanging loop
6. Cleaning brush
7. USB charging cable
8. Limit combs (3 / 6 / 9 / 12mm)
IN THE BOX
The packaging should contain:
• Hair tondeuse, USB charging cable, cleaning brush and
4 limit combs (3 / 6 / 9 / 12mm).
• User manual, read these instructions before use.
USE
What to do before fi rst use:
• Remove the packaging material and inspect the device for damage.
• Do not operate the device if it is damaged in any way. Return it to your
seller immediately.
• Never expose the appliance to temperatures below -10°C or higher than +40°C for long periods of time.
• In order to get an ideal cutting effect, check all accessories of the product, as well as clean and maintain the product.
INTENDED USE
• Warning! Only use the device externally.
• The appliance is only intended for human hair.
• Any incorrect use can be dangerous!
• The hair must be clean and dry when being cut.
• Only shave small areas at one time.
• The cutting head will jam if you try to work too quickly or try to cut too much hair at once.
• Let the appliance run for a short time before starting to cut.
USING THE APPLIANCE
• Turn on the appliance. To turn on the appliance press the button on the side. Hold the appliance in your palm with an angle
perpendicular to the plane of the skin (90°). There is no need to apply much pressure on the appliance.
• Just let the appliance touch the surface of your skin gently.
CLEANING AND MAINTENANCE
• Turn off your appliance and wait until it is completely cool. Before cleaning, remove the accessory and the used blade and clean
with the aid of the cleaning brush that was fi tted in the product.
• Clean your appliance using a damp cloth and then dry it.
8
3
6
7
4
1
2
4
5