General Features; Intended Use; Using The Appliance - CODE HOMME ACT928822578 Bedienungsanleitung

GENERAL FEATURES

Please read these instructions carefully before using this product and
keep them in a safe place for future reference
1. On/Off button and charging indicator light
2. Charging input port
3. Adjustable combs (1, 2, 3 and 4 mm)
4. Trimmer blade
5. Cleaning brush
6. Charging cable
7. Adjustable limit comb position place
IN THE BOX
• Rechargeable precision hair clipper / USB charging cable / cleaning
brush / 4 limit combs.
• User manual. Read these instructions before use.
USE
What to do before first use:
• Remove the packaging material and inspect the device for damage.
• Do not operate the device if it is damaged in any way. Return it to your
seller immediately.
• Never expose the appliance to temperatures below -10°C or higher than
+40°C for long periods of time.
• In order to get an ideal cutting effect, check all accessories of product,
as well as clean and maintain the product.

INTENDED USE

• Warning! Only use the device externally.
• The appliance is only intended for human hair.
• Any incorrect use can be dangerous!
• The hair must be clean and dry when being cut.
• Only shave small areas at one time
• The cutting head will jam if you try to work too quickly or try to cut too much hair at once.
• Let the appliance run for a short time before starting to cut.

USING THE APPLIANCE

• Attach the accessory which is to be used in the appliance.
• Turn on the appliance. To turn on the appliance press the switch On / Off upwards. Hold the appliance in your palm with an angle
perpendicular to the plane of the skin (90°). There is no need to apply much pressure on the appliance.
• Just let the appliance touch the surface of your skin gently.
TIPS AND HINTS CONCERNING USE
1. The hair must be clean and dry when being cut.
2. Only cut small amounts at one time.
3. Cut the hair with progressively closer settings until you reach the desired length.
4. The cutting head will jam if you try to work too quickly or try to cut too much hair at one.
5. Let the appliance run for a short lime before starting to cut.
6. Using the cutting head without its attachment, you can finely trim a beard -even the hard-to-reach parts - and can cleanly shave
hair over the temples and neck.
3013751_CH_PrecisionHairClipper-PR-2492_Manual_125x170mm_2022_DEF.indd 4 3013751_CH_PrecisionHairClipper-PR-2492_Manual_125x170mm_2022_DEF.indd 4
4
30-08-2022 13:06 30-08-2022 13:06