GENERAL FEATURES
Please read these instructions carefully before using this product and
keep them in a safe place for future reference.
1. Trimmer
2. Precision trimmer
3. Shaver
4. Combs: 3 Combs with height adjustment
5. Button ON and OFF
6. USB charging cable
7. Cleaning brush
8. Comb
9. Base store for trimmer and accessories
IN THE BOX
• Rechargeable trimmer
• 3 different heads: trimmer, shaver and precisiontrimmer
• 3 combs
• Base
• Comb
• Cleaning brush
• User manual
USE
What to do before fi rst use:
• Remove the packaging material and inspect the device for damage.
• Do not operate the device if it is damaged in any way. Return it to your seller immediately.
• Never expose the trimmer to temperatures below -10°C or higher than +40°C for long periods of
time.
• In order to get an ideal cutting effect, check all accessories of product, as well as clean and
maintain the product.
INTENDED USE
• Warning! Only use the device externally.
• The appliance is only intended for human hair.
• Any incorrect use can be dangerous!
• To remove an attachment, hold the trimmer with one hand and gently rotate the attachment to
the right with your other hand. Now you can take off the attachment. Put on a new attachment
and rotate it to the left to lock it in position. When (un)locking the attachment you can hear a
gentle ' c lick', the indication stripe of the attachment and body are now aligned.
• The hair must be clean and dry when being cut.
• Only cut small amounts at one time.
• Cut the hair with progressively closer settings until you reach the desired length.
• The cutting head will jam if you try to work too quickly or try to cut too much hair at once.
• Let the appliance run for a short time before starting to cut.
USING THE APPLIANCE
• Attach the accessory which is to be used in the appliance.
• To withdraw hold the hair trimmer with both hands and press the blades out with your thumb and support the blades to avoid falling.
• Select the accessory depending on your needs.
• Attach the accessory to your hair trimmer.
• Turn on the appliance. To turn on the appliance, press the switch On / Off upwards. Hold the appliance in your palm with an angle
perpendicular to the plane of the skin (90°). There is no need to apply much pressure on the appliance.
• Just let the appliance touch the surface of your skin gently.
• Move the appliance closer to the area to be trimmed and move the appliance up and down gently to trim the hairs.
4
Step 1. Place one of the three
attachments on body.
Step 2. Lock attachment.