Herunterladen Diese Seite drucken

OSRAM SMART+ WIFI CO DETECTOR Bedienungsanleitung Seite 3

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
+
SMART
WIFI CO DETECTOR
30s
1x
4)
yellow
1x
NOTE: REPLACE
THE ALARM IF:
a)
TEST
The test function does not operate
properly.
7)
IMPORTANT: The apparatus should be
installed by a competent person.
In a multi-level home (same as in a single-level home plus):
Install at least one CO Alarm near or within each separate
sleeping area. For added protection, install at least one CO
Alarm on each level of the home. If you have a basement,
install that CO Alarm at the top of the basement stairs.
3
replace
battery
5)
b)
6)
Yellow LED flashes twice every 30
seconds. One long beep and one
short beep every 30 seconds.
10)
12)
TEST
c)
30s
2x
yellow
1x 1x
It is not operating properly: You should
always replace a smoke alarm device
after 10 years from date of purchase.
8)
A CO Alarm should be centrally located outside of each separate
sleeping area in the immediate vicinity of the bedrooms.
For added protection, install additional CO Alarms in each
separate bedroom, and on every level of your home.
If your bedroom hallway is longer than 40 feet (12 metres),
install a CO Alarm at BOTH ends of the hallway.
In a single-level home:
Install at least one CO Alarm near or within each separate
sleeping area. For added protection, install an additional CO
Alarm at least 20 feet (6 metres), away from the furnace or fuel
burning heat source.
13)
1x
week
4x
red
4x
>10
years
9)
11)

Werbung

loading