RENPHO R-X002 Bedienungsanleitung Seite 9

TROUBLESHOOTING
PROBLEM
Heat not working
Not working or
stopped working
SPECIFICATION
Product Name
Model
Input
Rated Power
Product Weight
Product Size
Temperature
Water Capacity
REASON
No power
Temperature not set
The device will
automatically stop
heating once the
water temperature is
higher than or equal
to the temperature
you set
Not turned on
Preset working
time is up
If the water
temperature exceeds
51℃, the device
cannot be turned on
due to the overheat
protection
Foot Spa Massager
R-X002
AC220-240V, 50Hz
500W
4.12lbs / 1.87kg
400×340×170 mm / 15.7×13.4×6.7 inch
95°F - 118°F / 35℃ - 48℃
4L-7L
EN-06
SOLUTION
Make sure the machine is properly
plugged in and turned on
Turn on the heating function
Press the " " to set temperature
The heating function will only
operate after that
The device will continue heating
the water once the water
temperature is lower than the
temperature you set
Press the power button to turn it on
Restart the footbath
Do not add water exceeding
51℃;
Turn on the device again when
the water temperature is less
than 51℃