Control Panel - Renpho R-X002 Bedienungsanleitung

1.3 To avoid excessive stimulation of skin, the massage time should not exceed the
recommended 60 minutes at a time.
1.4 Please stop using the device once you feel uncomfortable during the massage.
2. Operation Instruction

2.1 Control Panel

Heating Indicator Light
Power ON/OFF
Temperature
Setting
Do not use it without water
1. Press " " to turn the machine on or off. When it is turned on, the display screen will
show the current temperature of the water in the foot spa massager.
2. Press " " to turn on the heating function after plugging in. The default preset tempera-
ture is 40℃. Press this button again to increase the preset temperature at one-degree
increment. When the preset temperature reaches 48℃, press this button again to reset
the temperature back to 35℃.
Note: The preset temperature range is from 35℃ to 48℃. If the current water tempera-
ture reaches your preset temperature, the machine will automatically stop heating. If the
current water temperature is below your preset temperature, the machine will automati-
cally start heating. If you want to stop heating manually, please press the power button to
turn it off.
EN-04
Spa Mode Indicator Light
Timer Setting
Spa Mode Setting
Time Indicator Light