What To Do If - AEG Electrolux BE7614000 Benutzerinformation

D
BE7714000
The middle panel has a dot in the left corner. When you install this panel, make sure that
the dot is in the top left corner of the glass panel.
The first glass panel has a decorative frame. When you install this panel, make sure that the
screen-printing is on the outer side. Make sure that the surface of the glass panel frame is
not rough when you touch it.

WHAT TO DO IF...

WARNING!
Refer to "Safety information" chapter.
Problem
The appliance does not heat up
D
Possible cause
The appliance is deactivated
The time of day is not set.
The necessary settings are not
set
The automatic switch-off is ac-
tivated
The fuse is released
BE7614000
Activate the appliance
Set the clock. Refer to "First
setting the time of day"
Make sure, the settings are cor-
rect
Refer to „Automatic switch-
off"
Make sure, if the fuse is the
cause for the malfunction. If
the fuse releases again and
again, refer to an authorized
electrician
25
What to do if...
D
Solution