AEG Electrolux BE7614000 Benutzerinformation Seite 17

The core temperature sensor
The core temperature sensor measures the core temperature of the meat. When the meat is
at the set temperature, the cooking programme deactivates.
There are two temperatures to set:
• The oven temperature: refer to the table for roasting in the recipe book.
• The core temperature: refer to the table for the core temperature sensor in the recipe
book.
Only use the core temperature sensor supplied or original replacement parts.
1. Activate the appliance.
2. Put the point of the core temperature
sensor in the centre of the meat.
3. Put the plug of the core temperature sen-
sor in the socket at the side wall of the
appliance.
The display shows a flashing symbol
and the default set core temperature. The
temperature is 60 °C during the first use,
and the last set value during each subse-
quent use.
4. Touch
ture.
5. Touch
You can set the core temperature only when the symbol
static symbol
value.
6. Set the oven function and, if necessary, the oven temperature.
The display shows the current core temperature and
tween the set oven temperature and the current oven temperature).
The core temperature sensor must stay in the meat and in the socket during the cooking.
While the appliance calculates the approximate duration time, the value of the Count Up
Timer function shows in the Timer/Residual heat display. When the first calculation ends,
the Timer/Residual heat display shows "-", and then the approximate duration of the cook-
ing.
The appliance continues to calculate the duration during the cooking. The display updates
at intervals with the new duration value.
7. When the meat is at the set core temperature, the core temperature and
appliance deactivates. An acoustic signal sounds for two minutes.
Touch on/off sensor field to deactivate the acoustic signal.
or to set the core tempera-
or the settings save automatically after 5 seconds.
before you set the core temperature, use
Using the accessories
flashes. If the display shows a
and or to set a new
(which shows the relation be-
17
flash. The