Use Of The Save Function - Essentiel B Rc41-328 Bedienungsanleitung

• In the next 30 seconds, press and hold the button whose function you want to delete. Wait until
you see three successive flashes, which indicates that the operation has been completed. Then
release the button
Use of the save function
The SAVE function allows a sequence of buttons to be saved, and allocated to a single, consolidated
button. Various subsequent
control to achieve the desired
The SAVE function allows a sequence of buttons to be automated (also linked to several different
devices) without requiring you to remember them or repeat them each time.
The SAVE function memorises the pressing of up to 31 buttons, as well as the duration of press
and release of the buttons.
All of the buttons, except the button @
and reproduce the SAVE function. The button used loses its original functionality, which will be
restored if the specific activation
To reproduce the SAVE function, press the button with which it has been associated. The remote
control then produces the entire saved sequence
completed.
You are not able to define recurrent
SAVEfunctions).
You can memorise several SAVE functions in different modes of use on the remote control, up to
31 maximum.
Memorising SAVE functions can be repeated several times until the desired result is achieved. In
addition, the sequences
MEMORISATION
Pressing the desired SAVE button allows the remote control RC41-328 to automatically reproduce
the memorised sequence.
On the remote control RC41-328, first select the mode of use, then press and hold the button
@ until the indicator light turns on. Release the button @
Briefly press the button @
the SAVE function associated.
Now the remote control is ready to record the series of desired
the buttons to be memorised
To end the memorisation process, press and hold the button @
flashes. This indicates that the function has been saved to memory. Releasethe button @
Each SAVE function used reduces the corresponding number of LEARN functions available.
operations may sometimes
result.
and the selection buttons can be allocated to save
code is reset.
or embedded
saved remain in memory even with the batteries
again and then briefly press the button with which you would like
at the rate normally
need to be carried
by ignoring any other command
SAVE functions
buttons.
used to control the devices
until you see three successive
out on the remote
until it has been
(SAVE recalling other
depleted or removed.
Press successively on
concerned.