use
The RC41-328 remote control allows you to control up to 4 different devices: TV - SAT (Satellite
decoder) - TER (terrestrial digital) - DVD (or Blu-Ray) - PVR (Digital video recorder, Media Centre) -
CAB (cable TV) - ADSL (decoders for ADSL TV) - AUX (other audio-video devices).
By using the LEARN function, the remote control RC41-328 can capture and store in memory the
infrared signals of other remote controls
It has also been designed to be connected to a COMPUTER / TABLET / SMARTPHONE using the
audio cable provided
in order to download
This remote control has a back-up
Insertion
of batteries
The remote control
requires the use of 2 new alkaline batteries
type AAA/LR03
of I .5v (batteries
the correct
polarity as illustrated
DO NOT use rechargeable
BATTERY
TEST: press and hold down the button
that the indicator
light remains
the
button.
If the light flashes
or remains off, the batteries
charged.
You will need to replace them with new batteries.
It is recommended
that
Selection
of mode
IMPORTANT:
As the remote control is able to control 4 different devices, while it is being configured (as well as
during use), it is vital to select the correct mode of use, in other words, define which device the
remote control must control (TV / SAT, etc.).
To select the correct mode of use, press one of the 4 selection
related to the device to be controlled (for example: TV)
Identification
of the code
Before using the remote control,
specific
code associated
and have them associated
the latest information
memory that saves the settings even if the batteries are removed.
into
the remote
provided).
Insert them, ensuring
in the diagram.
batteries.
continuously
on until you release
are not sufficiently
used
batteries
are not
leak and damage
your remote
of use
related
to a device
for each device that you want to control,
with the device.
with the buttons of your choice.
related to its configuration.
control
and
check
left
in the
remote
control.
control.
buttons
at the top,
These
could
you need to enter a