Manual Search - Essentiel B Rc41-328 Bedienungsanleitung

Identify the specific code and enter it on the remote control,
TABLET
SMARTPHONE - TABLET
Use the QR-code
https://www.cme.it/boulanger
After having found the specific
the remote control by following
ENTERING OF CODE.
Manual search
TAKE NOTE: it can take up to 5 minutes to search for a code.
Place yourself in front of the device to control, and ensure that it is TURNED ON
(and not in standby mode).
• If necessary, turn on the device with the original remote control (if it is working) or
using the buttons on the device itself. Refer to the supplier's operating manual to
locate these buttons.
On the remote control
and hold the button
Release the button
Pointing the remote
ON/OFF button and
WARNING, when the device turns off, IMMEDIATELY
Three successive flashes indicate that the procedure has been done correctly.
Check that the remote
(turn on and off, change channel, increase or decrease volume, etc.). If this is not the case,
REPEAT the procedure.
NOTE: When the list of codes to search ends, the remote control quits the search, and the
indicator light stays off. If no result is obtained,
section SMARTPHONE
SMARTPHONE
- WEB
- WEB
indicated here, or
andfollowthe instructionsprovided.
code associated
the instructions
RC41-328, first select the mode of use, and then press
until the indicator light on the remote control turns on.
control at the device,
wait until the device
CHECKING
control RC41-328 is able
- TABLET - WEB or view
in one of the following
SEARCH
MANUAL
log in on webpage
with the device, enter it on
in the paragraph DIRECT
PRESS AND HOLD
turns off.
RELEASE the button.
to control the device's
try to follow the procedure
the SUPPORT section.
ways:
SCAN ME
the
main functions
described in the