English (Original Instructions); Electrical Safety - Stanley Fatmax Sfmcpp32 Bersetzung Der Originalanweisungen

English
18V PRUNER
SFMCPP32
WARNING: Read all safety warnings, instructions,
illustrations, and specifications in this manual,
including the battery and charger sections provided in
an original tool manual or the separate Batteries and
Chargers manual. Manuals can be obtained by contacting
Customer Service (refer to the back page of this manual).
Technical Data
Voltage
Type
Battery type
Cut capacity
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to EN62841:
L (emission sound pressure level)
PA
K (uncertainty for the given sound level)
L (sound power level)
WA
K (uncertainty of measured sound power level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission level
represents the main applications of the tool. However, if the tool is
used for different applications, with different accessories or is poorly
maintained, the vibration and/or noise emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or noise should
also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
EC‑Declaration of Conformity
Machinery Directive
o
Pruner
SFMCPP32 Type 1
We, the manufacturer as stated below, declares that these
products described under Technical Data are in compliance with:
2006/42/EC, EN 62841-1:2015+A11:2022, EN ISO 12100:2010.
2
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact us at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of the manufacturer.
SFMCPP32
V 18
Markus Rompel
DC
Vice President of Engineering Europe
1
Stanley Black and Decker Deutschland GmbH
Li‑Ion
Stanley, Richard-Klinger-Strasse 11,
mm 32
65510 Idstein, Germany
08.05.2025
kg 1.3
a
instruction manual.
Definitions: Safety Guidelines
dB(A) 64
dB(A) 3.0
The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
dB(A) 74

dB(A) 3.1
which, if not avoided, will result in death or serious injury.

m/s 2 2.5
which, if not avoided, could result in death or serious injury.
2
m/s 1.5

if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.


GENERAL POWER TOOL SAFETY WARNINGS

illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
The term "power tool" in the warnings refers to your mains‑operated
(corded) power tool or battery‑operated (cordless) power tool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b ) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c ) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.

2) Electrical Safety

a ) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
WARNING: To reduce the risk of injury, read the
DANGER: Indicates an imminently hazardous situation
WARNING: Indicates a potentially hazardous situation
CAUTION: Indicates a potentially hazardous situation which,
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: Read all safety warnings, instructions,
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE