Next Level Racing PERFORMANCE Serie Bedienungsanleitung Seite 8

support@nextlevelracing.com
A)
A) Uninstall the 2 x Rubber Covers on the axle, and the 4 x Rubber Covers, M8 25mm Bolts with Lock
01
Washers and Washers on the Seat Base.
B) Uninstall the 2 x M5 10mm Screws and remove the Recliner Cover.
A)
A) Align the Seat Backrest with the Seat Base.
02
B) Bolt through and secure with the 4 x M8 25mm Bolts with Lock Washers and Washers uninstalled in
the previous step.
03
Reinstall the plastic Recliner Covers and the 2 x M5 10mm Screws.
B)
B)
NOTE: Clip the plastic on the Recliner
Cover over the metal bracket.
8
PARTS:
• • 1 x Seat Backrest
• • 1 x Seat Base
PARTS:
• • 1 x Seat Backrest
• • 1 x Seat Base
• • 4 x M8 25mm Bolts with Lock
Washers and Washers
PARTS:
• • 2 x Recliner Covers
• • 2 x M5 10mm Screws