Next Level Racing PERFORMANCE Serie Bedienungsanleitung Seite 15

A)
A) Lift the Seat Slider Lever and slide the Seat Rails all the way forward to access the front mounting
22
holes on the Seat Slider.
B) Align the Seat Slider front mounting holes with the T-Nuts in the front 4040 Extrusion that was
uninstalled in Step 14. Secure it to the Seat Sliders using M8 Bolts.
23
Align the threaded holes on the end of the 4040 Extrusions with the mounting holes and slots on the
Seat Brackets.
24
Bolt through and secure with Ratchet Handles previously uninstalled in Step 13.
B)
Video Instruction: bit.ly/nlrbuild
NOTE: Partially tighten bolts
with fingers, then secure using
Allen Key.
Repeat
on Other
Side
15 15
PARTS:
• • 1 x Front 4040 Extrusion
• • 2 x M8 16mm Bolts
• • 2 x M8 Spring Washers
Note: Use Spring Washers with M8
Bolts when installing Seat to the
F-GT Elite Cockpit.
PARTS:
• • NIL
PARTS:
• • 4 x Ratchet Handles