Intenso MW10000 Bedienungsanleitung Seite 14

Commissioning / Charging the power bank / Charging connected devices
a) Charging the power bank
Please connect the included USB-C cable to the USB-C port (USB-C In/Out) of the power bank and connect
the other end of the USB cable to a USB-C power adapter or USB-C port on your computer. Of course, you
can also use your own USB-C cable.
The required charging time for the power bank depends on the chosen power source and its output ca-
pacity.
Normal charging:
Use a standard USB power adapter or USB port of a computer to charge the power bank via the USB-C In/
Out port (max. 5.0 V/DC 2.5 A = max. 12.5 W). The status LED will remain off.
Fast charging:
To charge the power bank with maximum performance (9.0 V/DC 2.0 A, 12,0 V/DC 1.5 A = 18.0 W), please
use a power adapter that supports the Power Delivery (PD) standard. Fast charging is indicated by the green
function LED. If it remains off, your power adapter or the cable being used is not PD-compatible, and the
power bank will charge at a normal speed.
b) Charging devices with the power bank
Wireless charging:
Place your device on the wireless charging area of the power bank. Devices that support Apple MagSafe will
automatically align optimally due to the built-in magnets. All other devices must be manually aligned. The
charging process will now start automatically.
If the charging process does not start automatically, please check whether your device supports wireless
charging and if the power bank is sufficiently charged and activated. There may also be a foreign object
between the devices or you may be using a smartphone case that is not suitable for wireless charging. You
may also need to adjust the alignment of your device. If the power bank detects an issue, the function LED
will blink blue.
The power bank charges devices wirelessly with a maximum of 15 watts. The output power depends on the
connected device and the standard it supports. If no wireless fast charging is available, the function LED will
be blue. If the device signals to the power bank that it also supports fast wireless charging, it will be activa-
ted automatically, and the function LED will turn turquoise. Depending on the device's charge level, it may
take a few minutes for fast charging to be activated, and the power bank may switch between both modes
depending on the device's charge level and temperature during the charging process.
To end the charging process, simply remove your device from the power bank or double-press the function
button.
Please note that the surrounding temperature and the device's temperature can affect the charging speed,
as most devices reduce power intake at higher temperatures.
Wireless charging generates heat. This is normal. Therefore, do not place devices on soft surfaces, such as
wool blankets, during wireless charging, so that heat can dissipate from the device.
EN - Page 5 of 7