Dell PowerEdge M905 Informationsaktualisierung Seite 8

PowerEdge Blades — Compatibility Matrix
For the Quad-Port Mezzanine Cards
The following tables shows the compatibility of the PowerEdge blade systems
with the quad-port mezzanine card. The following notations are used in the
table.
• X denotes that the mezzanine card ports are supported on the IOM fabric.
• A blank value denotes that the mezzanine card ports are not supported
on the IOM fabric.
• N/A denotes that the fabric does not exist for the corresponding
half height blades.
–
Table 1-3. Configuration Matrix for Quad-Port Mezzanine Card
PowerEdge Fabric B1
Blade
Port 1
and 2
M710 X
M905 X
M805 X
M605 X
M610 X
M600 X
8
Information Update
Fabric C1
Port 3 Port 1 Port 3
and 4 and 2 and 4
X X X
X
X
X
X X X
X X X
Fabric B2
Port 1 Port 3 Port 1
and 2 and 4 and 2
X X X
X X
X X
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
Fabric C2
Port 3
and 4
N/A
N/A
N/A