Configuring The I/O Modules; Overview - Dell PowerEdge M1000e serie Konfigurationsanleitung

Configuring the I/O Modules

Overview

The M1000e enclosure supports three redundant I/O fabrics, selectable
between combinations of Ethernet and Fibre Channel modules. (Additional
fabrics including Infiniband will be supported in the future.) You can install up
to six hot-swappable I/O modules in the enclosure, including Fibre Channel
switches, Fibre Channel pass-throughs, Ethernet switches, and Ethernet pass-
through modules. Figure 3-1 shows the numbering of the I/O bays.
Figure 3-1. I/O Module Bay Numbering
C2 B2 A2
A1 B1 C1
2
37
Configuration Guide