Presetting The Stations Automatically - Samsung DVD-V6700 Benutzerhandbuch

Presetting the Stations
Automatically
You do not need to preset the stations if you
have already set them automatically (refer to
"Plug & Auto Set Up" on page 13).
Your DVD-VCR contains a built-in tuner used to
receive television broadcasts.
You must preset the stations received through
the tuner. This can be done:
• Plug & Auto Set up (refer to page 13).
• Automatically.
• Manually (refer to page 17).
You can store up to 80 stations.
1
Press the MENU button, then press the
OK or ‹ button.
SETUP
Language
Clock
DVD
Install
VCR
User Set
Auto Power Off
PROG
Screen Messages
FUNC
OK
2
Press the œ or ƒ button to select Install,
then press the OK or ‹ button.
The Install menu is displayed.
SETUP
Auto Setup
Manual Setup
DVD
VCR
PROG
FUNC
OK RETURN
3
Press the OK or ‹ button. The Country
Selection menu is displayed. Press the œ or
ƒ,¦ or ‹ buttons to select your country.
A NL S
B I CH
DK N TR
FIN P GR
D E HU
OK
16 - English
Setup
‹ ‹
: English
‹ ‹
‹ ‹
‹ ‹
‹ ‹
: Off
‹ ‹
: On
RETURN MENU
Install
‹ ‹
‹ ‹
MENU
Country Selection
PL
CZ
Other
RETURN MENU
4
Press the OK button. A message is displayed,
indicating that any channels already preset on
your DVD-VCR will be deleted.
Your data will be lost
Press OK to continue
MENU to exit
OK
5
Press the OK button to start the auto scan-
ning. The message Please Wait is displayed.
Please Wait
‹‹
• The first frequency band is scanned and
stored, then the DVD-VCR searches for the
second station and so on.
When the automatic scanning procedure
has finished, the DVD-VCR switches
automatically to programme 1.
• If you wish to cancel the auto scanning
before the end, press the MENU button.
Note
• The number of stations automatically stored by the
DVD-VCR depends on the number of stations that
it has found.
• The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually
(refer to page 15).
• Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required (refer to
page 18).
Auto Setup
RETURN MENU
Auto Setup
10%
RETURN MENU