Connecting Dvd-Vcr To The Tv Using The S-Video Cable (Dvd Only); Connecting Dvd-Vcr To The Tv Using The Component Video Cable (Dvd Only) - Samsung DVD-V6700 Benutzerhandbuch

Connecting DVD-VCR to the TV
using the S-Video Cable (DVD only)
You will enjoy high quality images. S-Video
seperates the picture element into black and
white(Y) and colour(C) signals to present clearer
images than regular video input mode.
1
Connect one end of the S-Video cable into
the S-VIDEO output jack on the rear of the
DVD-VCR.
2
Plug the other end of the S-Video cable into
the appropriate input connector on the televi-
sion.
3
Connect one end of the audio cables supplied
into the AUDIO LINE output jacks on the rear
of the DVD-VCR.
• Take care to respect the colour coding of
the left and right channels.
4
Plug the other end of the audio cables into
the appropriate input connectors on the televi-
sion.
Note
• Use the S-Video connection method only for
the DVD.
3
1
4
2
Connecting DVD-VCR to the TV
using the Component Video Cable
(DVD only)
Your TV must support progressive scan input to
allow you to watch component video output.
You will enjoy high quality accurate colour repro-
duction images. Component video seperates the
picture element into black and white (Y), blue
(Pb), red (Pr) signals to present most clear and
clean images.
1
Connect Component video cables between
the COMPONENT VIDEO OUT jacks on the
rear of the DVD-VCR and COMPONENT
VIDEO IN jacks on the rear of the TV.
2
Connect audio cables between the AUDIO
LINE OUT jacks on the rear of the DVD-VCR
and AUDIO IN jacks on the rear of the TV.
• Take care to respect the colour coding of
the left and right channels.
2
COMPONENT VIDEO IN
COMPONENT VIDEO OUT
COMPONENT INPUT
English - 11
1