cecotec TITANIUMSWORD 2000 HAND Bedienungsanleitung Seite 11

on the ground and maintain a proper balance. This will
provide better control of the power tool in unexpected
situations.
Wear appropriate clothes. Do not wear loose clothing
f)
or jewellery. Keep your hair and clothing away from
moving parts. Loose clothes, jewellery or long hair can
get caught in moving parts.
If devices are provided for the connection of dust
g)
extraction and collection facilities, ensure these are
connected and properly used. Dust vacuuming can
reduce dust-related hazards.
4) Power tool use and maintenance
Do not force the power tool. Use the appropriate power
a)
tool for the required application. The proper power tool
will do the job better and safer at the rate for which it
was designed.
Do not use the power tool if the switch does not turn
b)
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/
c)
or remove the battery pack, if detachable, from the
power tool before making any adjustments, changing
accessories or storing it. These preventive safety
measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and do
d)
not allow people unfamiliar with the power tool or these
instructions to operate it. Power tools are dangerous in
the hands of untrained users.
Maintain power tools and accessories. Check if the
e)
moving parts are misaligned or stuck, if there are
20 TITANIUMSWORD 2000 HAND
broken pieces or any other condition that may affect
the power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained
f)
cutting tools with sharp cutting edges are less likely to
jam and are easier to handle.
Use the power tool, accessories, etc. according to these
g)
instructions, taking into account the working conditions
and the work to be carried out. The use of the power
tool for operations different from those intended could
result in a hazardous situation.
5) Battery tool use and maintenance
Only recharge with the charger specified by the
a)
manufacturer. Using a charger suitable for one type
of battery pack with another type of battery pack may
cause a fire.
Use power tools only with specifically designated
b)
battery packs. Use of any other type of battery packs
may create a risk of injury and fire.
When the battery is not in use, keep it away from other
c)
metal objects, such as paper clips, coins, keys, nails,
screws or other small metal objects, which can establish
a connection from one terminal to another. A short circuit
between the battery terminals may cause burns or fire.
Under harsh conditions, liquid may leak from the battery;
d)
avoid touching it. In case of accidental contact, rinse
the affected part with water. If the liquid comes into
contact with eyes, seek additional medical assistance
immediately. Liquid leaking from the battery may cause
skin irritation or burns.
TITANIUMSWORD 2000 HAND 21