cecotec TITANIUMSWORD 2000 HAND Bedienungsanleitung Seite 10

WARNING: Read all safety warnings and instructions.
Failure to follow all warnings and instructions listed
below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1) Work area safety
Keep the work area clean and well illuminated. Cluttered
a)
or dark areas may cause accidents.
Do not operate power tools in explosive environments,
b)
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks that can ignite dust or
fumes.
Keep children and bystanders away while operating a
c)
power tool. Distractions can make you lose control of
the tool.
2) Electrical safety
Power tool plugs must match the socket. Never modify
a)
the plug in any way. Do not use any adapter plugs with
earthed power tools. Unmodified plugs and matching
sockets will reduce the risk of electric shock.
Avoid body contact with grounded surfaces, like pipes,
b)
radiators, stoves and refrigerators. There is a higher risk
of electric shock if your body is in touch with grounded
surfaces.
Do not expose power tools to rain or wet conditions.
c)
Water entering a power tool will increase the risk of
electric shock.
Do not misuse the cord. Never use the cord for carrying,
d)
pulling or unplugging the power tool. Keep the cord
away from heat, oil, sharp edges or moving parts. The
18 TITANIUMSWORD 2000 HAND
damaged or tangled cables can increase the risk of
electric shock.
When operating a power tool outdoors, use an extension
e)
cord suitable for outdoor use. The use of a cord suitable
for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
f)
unavoidable, use a power supply protected by a residual
current device (RCD). The use of an RCD reduces the risk
of electric shock.
3) Personal safety
Stay alert, watch what you are doing and use common
a)
sense when operating a power tool. Do not use a power
tool if you are tired or under the influence of drugs,
alcohol or medication. Lack of attention while operating
power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
b)
protection. Protective equipment such as dust mask,
non-skid safety footwear, helmet or hearing protection,
used under appropriate conditions, will reduce personal
injuries.
Avoid unintentional start-up. Make sure the switch
c)
is in the off position before connecting the tool to a
power source and/or battery, or before picking it up or
transporting it. Carrying power tools with your finger on
the switch or plugging in power tools with the switch in
the on position may cause accidents.
Remove any adjusting key or wrench before turning the
d)
power tool on. Leaving a wrench or a key attached to a
rotating part of the power tool may result in personal
injury.
Do not overstretch yourself. Always keep your feet firmly
e)
TITANIUMSWORD 2000 HAND 19