Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7
breakdowns and solutions
Failure
Error code E1 on display
Error code E2 on display
Error code C4 on display
The hot air fryer does not
function.
The ingredients are not
cooked.
The ingredients are not
fried evenly.
Fried snacks are not crispy
when they come out of the hot
air fryer.
There is white smoke coming
from the appliance.
Fresh fries are not fried evenly
in the hot air fryer.
Fresh fries are not crispy when
they come out of the hot air
fryer.
Energy consumption
Product information for power consumption and maximum time to reach applicable low power mode
Standby mode
The maximum time needed for the microwave oven to automatically reach the applicable low power
mode or condition.
Possible cause
Broken sensor cable
Short circuit in sensor cable
The pan is not properly placed
in the appliance.
The plug is not in the socket.
The pan is not properly placed
in the appliance.
The amount of ingredients in the pan
is too much.
The set temperature is too low.
The cooking time is too short.
Certain ingredients must be shaken
halfway the cooking time.
The snacks are not suitable for a hot air
fryer, but should be fried in oil.
You are cooking fatty ingredients.
The pan still contains fat residues
from a previous preparation.
An unsuitable potato variety
has been used.
The fries have not been properly rinsed
prior to frying.
The crispiness of the fries depends on
the amount of oil and water in the fries.
Solution
Contact the Inventum service department
or consult your supplier.
Contact the Inventum service department
or consult your supplier.
Properly place the pan in the appliance.
Insert the plug in an earthed socket.
Properly place the pan in the appliance.
Place smaller amounts in the pan.
Smaller portions can be fried more evenly.
Set the hot air fryer to a higher temperature.
Set a longer time.
Ingredients lying on top of each other
(such as fries), must be shaken halfway the
cooking time.
Use oven snacks or cover the snacks with a
little oil for a more crispy result.
When fatty ingredients are being cooked
in the hot air fryer, it is possible that a lot of
fat drips in the pan. The fat causes white
smoke and the pan can become hotter than
normal. This does not have an effect on the
appliance or on the end result.
Clean the pan after every use. Fat residues
that become hot can cause white smoke.
Use fresh potatoes that are a little
floury when cooked.
Properly rinse the cut fries to remove starch.
Make sure the fries are properly patted dry,
before the oil is added.
Cut the fries more finely for a crispier result.
Add a little more oil for a crispier result.
0,5 W
20 minutes
19
English
•
Werbung
