Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2
product description
1.
Water reservoir
2.
Grid
3.
Base unit
4.
Handles
5.
Pan
6.
Open button
7.
Automatic menus for cooking with Juicy
or Crispy
8.
Indication of temperature and
cooking time
9.
Automatic menus for cooking
with Crispy
10. Indicator for 'add water' when cooking
with Juicy
11.
Juicy key for juicy result
12. Crispy key for crispy result
13. Temperature down (only works with
Crispy mode and manual setting)
14. Key for switching between temperature
and time display
15. Temperature up (only works with Crispy
mode and manual setting)
16. Menu key for selecting automatic menus
and activating display
17. On and pause key
3
prior to first use
Before using the appliance for the first time, you should proceed as follows: carefully unpack the hot air fryer and remove all
packaging material and any promotional stickers. Keep the packaging (plastic bags and cardboard) out of reach of children.
After unpacking the appliance, carefully check it for external damage that may have occurred during transport. Place the hot
air fryer on a sturdy, flat and heat-resistant surface.
The keys used to operate the hot air fryer are touch controls. Carefully touch the controls with a finger to activate. At each
touch of a touch control, you can hear a sound signal.
SWITCHING ON AND SWITCHING TO STANDBY
As soon as you insert the plug in the socket, the hot air fryer is in the standby position. The display lights up.
When no key is touched for 2 minutes, the hot air fryer display switches off automatically. Press the
display again
• The hot air fryer only functions if the pan has been placed in the appliance correctly.
• Once the set time has elapsed, the hot air fryer automatically switches to the standby position. The fan continues to run
to allow the hot air fryer to cool down. After that, a beep will sound.
PRIOR TO FIRST USE
Check that the voltage corresponds with what is stated on the information plate and insert the plug in an earthed socket.
The heating element is provided with a protective layer that must be removed prior to first use. This is done by setting the
hot air fryer to the maximum position for approximately 10 minutes without any food in the appliance. Light smoke may form
due to the protective layer burning off the heating element. Therefore, ensure proper ventilation in the room. After removing
the protective layer you can switch off the hot air fryer.
2
4
5
7
8
11
12
13
14
1
6
9
15
16
17
button to activate the
English
3
10
15
•
Werbung
