Zeegma Planeet Multi Bedienungsanleitung Seite 13

TROUBLESHOOTING
NO. PROBLEM
1
The appliance does not
work.
2
The knob does not
work.
3
The appliance makes
excessive noise during
opera on.
4
Certain speeds in
the appliance are not
func oning.
5
The appliance is moving
around while in use.
6
The lock release knob
did not return to its
original posi on a er
placing the bowl and lid.
CLEANING
PLANETARY MIXER
1. Before cleaning, disconnect the power cord from the electrical outlet.
Never immerse the body of the appliance in water.
2.
Do not use abrasive substances or strong cleaning agents.
3.
Body of the appliance
1. Use only a damp cloth to clean the exterior of the appliance body.
Bowl and accessories
Clean the parts that come into contact with food using washing-up liquid.
1.
2. Allow the parts to dry completely before using them again.
SOLUTION
• Check to make sure that the appliance is
properly connected to the power supply.
• Check to make sure that the lock release
knob has returned to its original posi on.
If the appliance has been running
•
con nuously for 6 minutes, let it cool down.
The appliance will not switch on if all
•
accessories are not properly installed or the
caps are not securely
• Check to make sure that the appliance is
properly connected to the power supply.
• Check that the lock release lever is back in
place.
• Check to make sure that the bowl is seated
correctly.
• Check to make sure that the selected
accessory is correctly installed.
• Check the voltage and plug the appliance
into an outlet with a stable power supply.
Contact the authorised service.
•
If the selected speed does not work, set the
•
controller back to the "0" se ng, wait a few
minutes, then try again.
Check to make sure that the an -slip foot is
•
securely in place.
• Check to make sure that the appliance is
placed on a at and even surface.
Make sure that the lid is properly placed on
•
the bowl.
• Check to make sure that the bowl is seated
correctly.
ed (Fig. 19).
EN
13