Zeegma Planeet Multi Bedienungsanleitung Seite 11

Use Drawing
S rrer
Beater
BLENDER FUNCTION
1. Remove the rear cover (10, Fig. A) from the main body (Fig. 7).
Place the ingredients in the cup. Secure the lid and measuring cup ghtly onto
2.
the blender cup (Fig. 8, 9).
3. Place the glass cup onto the main body (Fig. 10) and turn it clockwise to secure.
Once securely closed, the appliance is ready for use.
Select the speed by turning the knob to the desired posi on, ranging from 1 to 6,
4.
or to "P" (see: Pulse mode).
Important! Place the silicone seal on the blender blade. Incorrectly posi oning the seal
beneath the blade may cause damage to the appliance.
Important! Do not operate the appliance con nuously for more than 1 minute. Allow
the appliance to cool to room temperature before using it again. To extend the lifespan
of the appliance, it is recommended not to use it for more than 6 consecu ve cycles.
A er using the appliance con nuously for 6 cycles, allow it to cool for 45 minutes.
Important! It is recommended to cut food into smaller pieces before placing it in the
cup. Avoid blending large quan
PULSE MODE
Set the knob to "P" and hold un l the desired result is achieved.
ICE CRUSHING FUNCTION
Place the ice in the cup and use the knob (3, Fig. A) to select the speed and ac vate
the ice-crushing func on.
AFTER USE
Switch o the appliance and unplug the power cord from the electrical socket.
1.
Remove the lid and measuring cup.
2.
3. Unlock and detach the cup.
Speed Time (min) Max.
2–4 3–10
5–6 3–10
es of food at once.
Ac on
660 g our speed 2 for 20 s,
+ 840 g speed 4 for over 2
min 40 s
water
3 egg speed 5 or 6 for more
than 3 min
whites
(minimum)
EN
11