AirStage ARXB07L Bedienungsanleitung Seite 8

TROUBLESHOOTING
The following conditions may not be breakdowns so check again.
Symptom
Doesn't operate at all:
The operation mode cannot
be changed:
Poor Cooling (or Heating)
performance:
In the following situations stop operation immediately and get in touch with authorized
service personnel.
G The problem cannot be solved even when the troubleshooting checks have been performed.
G The OPERATION indicator lamp (red) is flashing very fast (when receiver unit is connected).
G The wired remote controller or simple remote controller indicate EE (when connected).
G It has burning smell.
SPECIFICATIONS
MODEL
POWER SOURCE
AVAILABLE VOLTAGE RANGE
COOLING CAPACITY
HEATING CAPACITY
DIMENSIONS & WEIGHT
HEIGHT
WIDTH
DEPTH
WEIGHT
G Acoustic Noise Information : The maximum sound pressure level is less than 70 dB (A) for both indoor unit and outdoor
En-7
06H002_9374343027_en
G Has there been a power failure?
G Has a fuse blown out, or a circuit breaker been tripped?
G Is the main power switch set to the OFF position?
G Are you trying to engage in an operation different from the priority state?
G Is it in standby state?
G Are you trying to change to an operation different from the priority conditions?
G Did you adjust the room temperature settings (thermostat) correctly?
G Is the air filter dirty?
G Are the air conditioner's inlet port or outlet port blocked?
G Is there a window or door open?
G In the case of Cooling operation, is a window allowing bright sunlight to enter?
(Close the curtains.)
G In the case of Cooling operation, are there heating apparatus and computers in-
side the room, or are there too many people in the room?
G Is the fan speed set to low?
ARXB07L
[kW] 2.20
[kW] 2.50
[mm] 217
[mm] 663
[mm] 595
[kg] 18
unit.
According to IEC 704-1 and ISO 3744.
7
Items to check
ARXB09L ARXB12L
230V~50Hz
198 to 264 V
2.80 3.60
3.20 4.10
9/7/06, 1:58 PM
See Page
—
—
—
4
4
4
—
5
—
—
—
—
—
ARXB14L AUXR18L
4.00 5.30
4.80 5.60
217
953
595
25