Evolution R260 DCT Li Original Anleitungen Seite 3

LABELS & SYMBOLS
Warning
Read Instructions
Wear Safety Goggles
Wear Ear Protection
Wear Dust Protection
Wear Head Protection
Wear Safety Gloves
Wear Safety Boots
Keep Hands Away
CE Certification
Waste Electrical &
Electronic Equipment
Triman - Waste
Collection & Recycling
(RCM) Regulatory Compliance Mark for electrical
and electronic equipment.
Australian/New Zealand Standard
Only use diamond blades.
Do not use toothed blades.
Do not use defected or broken blades
High risk of kickback
Risk of dust inhalation
Risk of Fire. Ensure surrounding area is free from
flammable materials.
Unlock
Lock
Purchase separately
INTENDED USE OF THIS POWER TOOL
This product is a disc cutter saw and has been designed to
be used with diamond blades only. Only use accessories
designed for use in this machine and/or those recommended
specifically by Evolution Power Tools Ltd.
When fitted with an appropriate blade this machine can be
used to cut: brick, paving, concrete and related construction
materials, steel, non-ferrous metals and natural stone.
GENERAL POWER TOOL SAFETY WARNINGS
PLEASE READ THE GENERAL POWER TOOL SAFETY
BOOKLET PROVIDED SEPARATELY BEFORE USING THIS
TOOL.
ADDITIONAL BATTERY AND CHARGER SAFETY WARNINGS
WARNING: Read all the safety warnings and
instructions provided in the battery manual and the charger
manual before use.
SAFETY INSTRUCTIONS FOR DISC CUTTERS
• The guard provided with the tool must be securely
attached to the power tool and positioned for maximum
safety, so the least amount of wheel is exposed towards
the operator. Position yourself and bystanders away from
the plane of the rotating wheel. The guard helps to protect
operator from broken wheel fragments and accidental
contact with wheel.
• Use only diamond cut-off wheels for your power tool. Just
because an accessory can be attached to your power tool, it
does not assure safe operation.
• The rated speed of the accessory must be at least equal
to the maximum speed marked on the power tool.
Accessories running faster than their rated speed can break
and fly apart.
• Wheels must be used only for recommended
applications. For example: do not grind with the side
of cut-off wheel. Abrasive cut-off wheels are intended for
peripheral grinding, side forces applied to these wheels may
cause them to shatter.
• Always use undamaged wheel flanges that are of correct
diameter for your selected wheel. Proper wheel flanges
support the wheel thus reducing the possibility of wheel
breakage.
• The outside diameter and the thickness of your accessory
must be within the capacity rating of your power tool.
Incorrectly sized accessories cannot be adequately guarded
or controlled.
• The arbour size of wheels and flanges must properly fit
the spindle of the power tool. Wheels and flanges with
arbour holes that do not match the mounting hardware of
the power tool will run out of balance, vibrate excessively
and may cause loss of control.
• Do not use damaged wheels. Before each use, inspect
the wheels for chips and cracks. If power tool or wheel is
dropped, inspect for damage or install an undamaged
wheel. After inspecting and installing the wheel, position
yourself and bystanders away from the plane of the
rotating wheel and run the power tool at maximum no
load speed for one minute. Damaged wheels will normally
break apart during this test time.
• Wear personal protective equipment. Depending on
application, use face shield, safety goggles or safety
glasses. As appropriate, wear dust mask, hearing
protectors, gloves and shop apron capable of stopping
small abrasive or workpiece fragments. The eye protection
must be capable of stopping flying debris generated by
various operations. The dust mask or respirator must be
capable of filtrating particles generated by your operation.
Prolonged exposure to high intensity noise may cause
EN