Troubleshooting - Genius Chef Gebrauchsanleitung

GB
NOTE: When cleaning in the dishwasher, discolouration may occur on the underside of the plate due to the material.
The non-stick coating may discolour slightly with frequent use. This is harmless and does not affect its functionality.

Troubleshooting

WARNING!
Switch off the appliance and disconnect the mains plug before rectifying a fault!
Otherwise injuries or electric shocks may occur.
ATTENTION!
If the fault cannot rectified, please contact our customer service. Never open the appliance!
Display / Problem
Err" flashes in the Timer field, both temperature
displays show „no" and acoustic signals sound.
Err" flashes in the Timer field, both temperature
displays show „---" and acoustic signals sound.
Err" flashes in the Timer field, „OP" appears in the
temperature display and the following sounds are
emitted acoustic signals.
28
Instruction manual
Possible error
The electronic control has
recognised that one/both plates
have not reached the set
temperature.
The disc(s) is/are not inserted
correctly in the appliance.
The heating elements may
be damaged.
The connection to the heating
element could be damaged.
The electronic control has
recognised that one/both plates
are being heated too much.
One / both temperature sensors
are defective.
Possible solution
Disconnect the device
from the power supply.
Check that the plates are
inserted correctly. If
necessary, release the
locking mechanism
reinsert the plates.
Disconnect the device
from the power supply.
Make a note of the error
code and contact
customer service.
Disconnect the device
from the power supply.
Make a note of the error
code and contact
customer service.