Manual Mode - Genius Chef Gebrauchsanleitung

GB
After 90 minutes of standby, the device automatically goes into sleep mode (the display goes dark). It can be
„
reactivated by touching the display.

Manual mode

As soon as the appliance is active, the temperature (temp) and time (time) can be preselected using the
„
selection buttons.
Once the desired values have been set, pressing the start/stop button
„
Timer (time) function:
The selected time can be set using the
„
Each touch increases/decreases the time by 10 seconds, longer touches increase the time increments.
„
A few seconds after the appliance has completed the heating phase, the timer starts to run. The time can be
„
adjusted at any time during the cooking process.
When the timer has elapsed, 5 short beeps sound and the appliance automatically switches to standby.
„
If no time is preset (--:-- remains on the display), but only the temperature, the appliance runs for 90 minutes at
„
the selected temperature and then automatically switches to standby.
Temperature (temp) function:
In manual mode, the temperature is set individually for each plate (60°C - 230°C).
„
Touch to select a plate and the corresponding temperature field starts to flash.
„
The temperature can be selected using the
„
The plates can be used at the same or different temperatures.
„
Pressing the start/stop button
„
By default, the temperature is in °Celsius. To change the display to Fahrenheit, press and hold both temperature
„
selection buttons simultaneously for 3 seconds.
Holding the buttons again changes the temperature display back to °Celsius.
„
Grill process:
Pressing the start/stop button
„
move in a circle.
24
Instruction manual
buttons (0 - 90 minutes).
buttons. Then touch
starts the heating phase.
starts the heating phase. During heating, the LED indicators on the time display
will start the heating phase.
again to set the other plate.