Use - Genius Chef Gebrauchsanleitung

As an oven grill (position of the grill top fixed)

Use

ATTENTION!
Before use, make sure that the plates have been installed correctly and that the grease drip tray is in place.
Prepare the appliance (see above) and connect it to a working socket.
„
A signal tone sounds and the device is active.
„
The display is illuminated and settings can be made.
„
If no action is taken, the device switches to standby after 20 seconds.
„
The start/stop symbol then lights up red. The device is by touching the symbol.
„
Instruction manual
To open the appliance, open the grill top with your left hand by the handle and
press on the right hinge with your other hand to release the lock. The grill can
now be opened flat.
Now you can prepare different dishes on both plates without the cooking juices
mixing, or use different temperatures for different dishes.
The upper part of the grill can be fixed at a height using the distance control
(right-hand side).
This function is perfect for very thick grilled food, for gratinating or for grilled
food that should not be pressed together too much (e.g. sandwiches).
To adjust, open the grill using the handle and slide the distance control to the
desired value (1-5). If the distance control is set to „open", the plates can be
closed completely.
To adjust the height to the food, lower the grill top until it is on/shortly above the
food and then slide the control as far back as possible. The grill top now remains
in this position.
The locking mechanism of the grill top on the left-hand side must be released for
this function.
In the „lock" position, the upper and lower sections are locked for easier storage.
GB
23