ProfiOffice Prolamic 330 Plus Bedienungsanleitung Seite 3

Advise: Pls. refer for adjusting the temperature control to Fig. A. This should be used
as a indicator for the right temperature level depending on given pouch thickness (mic)
and paper/photo thickness (g/m²), which has to be laminated. Keep in mind that more
precise adjustment in-between shown range could be necessary and has to be aligned
with the result of lamination.
How to refer:
Adjust temperature control in this part of scala shown in Fig. A
which has been suggested for given paper/photo thickness
and selected film in mikron (mic). We recommend to start with regulation in the first
part of each area according to given film and paper/photo.
Paper / photo
Scetch for temperature control
G.B. G.B.
Abb. A
3